Clock Alarm - MBO Merkura 1050 Gebrauchsanweisung

Merkura 1050 GB neu
12

Clock alarm

C
Note:
Press key "B" to switch
back from alarm mode to
clock mode.
www.MBOservice.net
Downloaded from www.Manualslib.com
27.03.2003
1. Setting the clock alarm
In clock mode, press key "B" to switch to alarm
mode (ALM).
Now hold down key "C" for approx. 3 seconds
and let go. The hour display should flash. Set the
hours with key "B" and confirm with key "C".
The minutes now start to flash. Set the minutes
Z
O
N with key "B" and confirm with key "C".
E
2. Activating/deactivating the alarm
B In clock mode, press key "B" to switch to alarm
mode (ALM).
Press key "C" to switch the alarm on/off.
When the alarm is activated, the alarm icon
appears in the display. The alarm will start at the
time that has been set and will keep going for 1
minute.
Note:
To switch off the alarm, press any key.
manuals search engine
8:31 Uhr
SETTINGS
Seite 12