MBO Merkura 1050 Gebrauchsanweisung Seite 31

Merkura 1050 GB neu
Battery
installation
Note
Batteries are hazar-
dous waste. Do not
dispose them
together with the
household garbage.
Please return them to
your dealer for recyc-
ling or dispose of
them separately in
your local recycling
facility.
Downloaded from www.Manualslib.com
27.03.2003
BEFORE STARTING
Computer watch
Remove the back cover of
the computer with a screw-
driver, install the 3.0V-battery
(type: CR2016) with the
!
positive (+) pole facing up
and replace the cover.
Remove the battery and
reinsert it if the LCD displays
irregular figures. This will
clear and restart the compu-
ter`s microprocessor. The
device should then function
normally again.
Transmitter belt
Remove the battery compartment from the
transmitter belt (Fig.2a). Open the battery cover
underneath with a Philips screwdriver. Insert a
12V battery (type VR22 / L1028). Make sure that
you insert the battery with the poles as shown
on the sketch (Fig.2b). Close the battery compart-
ment.
Make certain that the cover is firmly closed to
prevent ingress of moisture in the transmitter.
Fig.2a
manuals search engine
8:31 Uhr Seite 7
www.MBOservice.net
7
Fig.1
Fig.2b