Setting The Time - MBO Merkura 1050 Gebrauchsanweisung

Merkura 1050 GB neu

Setting the time

C
C
To correct
an entry
Downloaded from www.Manualslib.com
27.03.2003
In clock mode, press and hold down key "C" until
the 24-hour display appears. Then let go of the
key. The display now starts to flash and HR
appears in the centre line. Use key "B" to switch
between 24-hour and 12-hour display. Confirm
with key "C". You can now set the time.
Z
O
The hour display (HR) now starts to flash. Use key
N
E
"B" to set the hours and confirm with key "C".
The minute display (MIN) now starts to flash. Use
key "B" to set the minutes and confirm with key
B
"C".
Now set the year (YR), month (MTH) and day
A
(DAY) in the same way and confirm each setting
with key "C".
The clock function is now set and the pulse
computer is ready for use. You can switch bet-
Z
ween clock mode and pulse mode by pressing
O
N
E
key "A".
B
If you make a mistake when setting the clock,
restart the relevant setting from the beginning.
manuals search engine
8:31 Uhr
SETTINGS
Seite 11
11
www.MBOservice.net