Timer Function - Galvamet KompaKTech Bedienungs- Und Wartungsanleitung

EN

TIMER FUNCTION

Use of timer facilitates cooking
Activation
 The induction hob and the selected cooking zone must be turned on.
 Touch
and
first (from the left) active cooking zone lights on.
 Touch
and
The symbol lights on only on the active cooking zones.

In 10 seconds from pressing

The timer value can be displayed:
 in minutes and seconds, up to 9min 59sec;
 in hours and minutes, up to 9h 59min. In this case the word "min" lights up under
the timer display.
Cooking time can be set independently for each cooking zone.
CHANGING THE PRE-SET COOKING TIME
Cooking time can be changed anytime during the operation:

Touch and

Touch and
where you wish to change the timer . The selected zone will show the symbol
Within 10 seconds tuch

Residual cooking time
 The timer will always display the minor residual cooking time (the symbol of the
selected cooking zone is more enlightened than the others );

Touch and

Touch and
where you wish to check the residual cooking time.
The zone will show the symbol lighted;
 The timer will show the residual cooking time.
Deactivation
Once the set operating time has elapsed, the acoustic signal is activated and the cooking
zone switches off. The acoustic signal can be switched off by touching
off by itself after 2 minutes.
at the same time, the timer displays
in order to select the zone where you desire to set the timer.
and
at the same time
at the same time as many times as necessary to select the zone
and to change the time.
at the same time;
as many time as necessary in order to select the cooking zone
and the symbol of the
set the desired cooking time
, or turning
60