Iii.2.B Executive Directions - Galvamet KompaKTech Bedienungs- Und Wartungsanleitung

EN
III.2.b EXECUTIVE DIRECTIONS
The base of the cabinet must be at least drilled as indicated in Fig. 3.13 and the back
removed in case.
Fig. 3.13
If the installation does not include the optional plasma filtering kit the cut of the base
can be reduced as shown at Fig. 3.14
Fig. 3.14
Installation of the appliance imply a maximum length of the drawers that may be mounted
under the hob (Fig. 3.15)
 Drawers depth = 400mm about
 Last drawer depth = 300mm
13