Bridge Function; Keep Warm Function - Galvamet KompaKTech Bedienungs- Und Wartungsanleitung

EN

BRIDGE FUNCTION

With this function it is possible to manage two zones with equal size.
The two zones are activated at the same time and controlled only through one of them.
Activation
Whether the two cooking zones operate at a different level, or at level 0, touch at the
same time any point of the related slider;
Now the two zones are operating together, the LED on the right of the related displays
lights on. The display of the control zone shows the set level while the display of the
managed zone shows .
When the function is active, the timer can be set, the LED will light up next to both
displays, and the fast cooking function can't be set.
If no pot is detected in the final cooking zone within 10 minutes, the bridge function is
automatically deactivated.
Deactivation
Touch any point of the respective sliders of the designated areas at the same time (same
procedure as per activation).
The function is deactivated, the displays of the two cooking zones display
set again.

KEEP WARM FUNCTION

The keep warm function is used to keep the previously cooked food warm and can also be
used as a defrosting or slow cooking function.
Activation
Touch on the desired cooking zone, "defrost"
, the "heating"
If you touch for the third time, the "slow cooking" mode is activated; If it is touched again,
the function is deactivated.
mode is activated;
mode is activated; if you touch again
and can be
58