Residual Heat Indicator - Galvamet KompaKTech Bedienungs- Und Wartungsanleitung

EN

RESIDUAL HEAT INDICATOR

The appliance is equipped with the residual heat indicator
heat up directly, but through the return heat transmitted by the pot. After the zone is
turned off, the display shows
food or defrost food.
When disappears, the cooking area is always hot.
Warning! Danger of burns!
FAST COOKING FUNCTION
Extra powerful setting may be additionally switched on for fast cooking. This extra power
is used for heating large quantities of food.
After switching on, the extra power is activated for 10 minutes then automatically
switches back on to the maximum normal level 9.
When fast cooking is activated, the power of one of the cooking zones is limited. The
display shows the cooking level and the limited power due to fast cooking on the other
cooking zone, alternating for a few seconds.
Activation
Touch on the desired cooking zone
The extra power is active.
The display show the symbol
Deactivation
Touch and scroll on the cursor of the desired cooking zone, until you get to
turn off the zone or, up to the desired cooking level.
and, as long as it is active, you can use it to heat up
. The cooking area does not
if you want to
56