Connecting The Devices; Connecting Kit A; Connecting Kit B; Connecting Kit C - SICK Visionary-B Betriebsanleitung

6.5

Connecting the devices

6.5.1

Connecting kit A

6.5.2

Connecting kit B

6.5.3

Connecting kit C

8022960/186T / 2020-08-27| SICK AG
Subject to change without notice
WARNING!
Risk of damage to the driver assistance system.
Connecting the display with the evaluation unit when the voltage supply is switched on
can damage the driver assistance system.
• Switch off the voltage supply before connecting the devices.

1. Connect the display cable to the display and the evaluation unit (8).
2. Connect the transmission cable to the sensor head and the evaluation unit (6)
and (7).
3. Connect the evaluation unit to the power cable for the vehicle's electrical sys-
tem (2).
NOTE!
The evaluation unit must be switched off when it is connected to the peripheral sys-
tems, otherwise the components may become damaged.
1. Connect the display cable to the display and the evaluation unit (8).
2. Connect the transmission cable to the sensor heads and the evaluation unit.
3. Connect the evaluation unit to the power cable for the vehicle's electrical system
(2).
1. Connect the display cable to the display and the evaluation units (8).
2. Connect the transmission cable to the sensor heads and the evaluation units (6)
and (7).
3. Connect the evaluation units to the power cable for the vehicle's electrical sys-
tem (2).
3 D S T R E A M I N G C A M E R A A N D D R I V E R A S S I S T A N C E S Y S T E M F O R A U T O M A T I O N
ELECTRICAL INSTALLATION
 
 
A N D C O L L I S I O N W A R N I N G | V I S I O N A R Y - B

 
8 7