Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information; General Safety Notes - SICK Visionary-B Betriebsanleitung

3d-streaming-kamera und fahrerassistenzsystem zur automatisierung und kollisionsvermeidung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2

Safety information

2.1

General safety notes

8022960/186T / 2020-08-27| SICK AG
Subject to change without notice
The Visionary-B CV is a driver assistance system designed to enhance collision
awareness. It assists drivers.
Driver assistance systems are not a substitute for driving with due care and
attention!
The mounting, electrical installation, and configuration of the device must be car-
ried out by professionally qualified and trained personnel only.
Before mounting the device, it is essential to take note of the operating instruc-
tions provided by the machine manufacturer and, where applicable, to evaluate
potential mounting locations with the manufacturer in advance.
When mounting and electrical installation work is being carried out, always comply
with applicable standard operating procedures, health regulations, and environ-
mental regulations.
The assistance system must not be used in areas with flammable/explosive atmo-
spheres!
Be sure to observe electrical connection values during installation.
Use only the cables provided to install the device.
Replace faulty or damaged cables and connectors immediately.
Replace damaged or faulty components immediately and in consultation with
SICK AG.
During mounting, it is essential to use suitable mounting equipment. The mounting
equipment must be self-locking or secured appropriately.
Ensure a constant voltage supply to the device within the prescribed parameters.
Operate the assistance system only within the prescribed operating parameters.
Check the assistance system regularly (at the end of each working day, for exam-
ple) to ensure that it is functioning properly.
Do not cover the evaluation unit; make provision for effective heat dissipation in
the mounting location.
Choose a mounting location for the evaluation unit where it will not be exposed to
direct sunlight.
Structural modifications to the system are not permitted!
3 D S T R E A M I N G C A M E R A A N D D R I V E R A S S I S T A N C E S Y S T E M F O R A U T O M A T I O N
SAFETY INFORMATION
A N D C O L L I S I O N W A R N I N G | V I S I O N A R Y - B
6 5

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Visionary-b cvVisionary-b ps

Inhaltsverzeichnis