Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Checking the installation
Setting up the programming interface
8022960/186T / 2020-08-27| SICK AG
Subject to change without notice
On Windows: Also install "Microsoft Visual C++ Redistributable for Visual Studio",
version 2015 or higher.
3.
Switch on the 3D camera by establishing the voltage supply to the evaluation unit.
4.
Ensure that your computer is connected to the evaluation unit via an Ethernet
cable. The IP address of the computer must be in the same subnet as the evalua-
tion unit. The IP address of the evaluation unit is 192.168.1.123.
5.
Execute one of the supplied programming examples to verify an error-free installa-
tion and connection to the camera.
•
On Windows: The default location for the programming examples is "%PRO-
GRAMFILES\ColliseoClient\bin", e.g., "SimpleViewer.exe"
•
On Ubuntu: The default location for the programming examples is "/usr/bin",
e.g., "./SimpleViewer"
NOTE!
Make sure that ports 4000 and 5000 are enabled on your computer.
Deactivate the firewall, if necessary.
After installing the programming interface, the following additional steps are required to
enable application programming.
3 D S T R E A M I N G C A M E R A A N D D R I V E R A S S I S T A N C E S Y S T E M F O R A U T O M A T I O N
PRODUCT DESCRIPTION
A N D C O L L I S I O N W A R N I N G | V I S I O N A R Y - B
7 9
Werbung
Kapitel
Inhaltsverzeichnis
