Mounting; Safety; Required Tools; Required Materials - SICK Visionary-B Betriebsanleitung

MOUNTING

5 Mounting
5.1

Safety

5.2

Required tools

5.3

Required materials

5.4

Accessories

8 2
3 D S T R E A M I N G C A M E R A A N D D R I V E R A S S I S T A N C E S Y S T E M F O R A U T O M A T I O N
A N D C O L L I S I O N W A R N I N G | V I S I O N A R Y - B
CAUTION!
Risk of device falling down.
The sensor head may fall down if it is not mounted properly. This can result in mild to
moderate injuries.
• It is essential that only suitable mounting accessories are used.
NOTE!
Tools for securing the sensor head in the mounting location must be used during
mounting. The sensor head is always mounted on a metal frame. If the sensor head is
being mounted on other accessories, some of the tools and accessories may differ from
those described here.
• Drilling machine
• Socket set or torque screwdriver, ring wrench
• Set of Allen keys (standard sizes)
• Selection of metal drills
NOTE!
The accessories listed are the minimum requirements. More and different accessories
may be needed depending on the type of mounting.
• Cable hose (slotted) resistant to temperature and weather
• Sufficiently dimensioned and appropriate fastening and mounting accessories
(e.g., cable clamps, insulating tape, cable ties)
NOTE!
The connection cables between the evaluation unit and the sensor head is a mandatory
requirement for the mounting process. Various lengths are available.
You need two cable sets for kit B and kit C!
Part number Description
2098100 Cable set for connecting the sensor head and evaluation unit
(3 m)
2098101 Cable set for connecting the sensor head and evaluation unit
(5 m)
2098102 Cable set for connecting the sensor head and evaluation unit
(10 m)
8022960/186T / 2020-08-27| SICK AG
Subject to change without notice