Getting Started - Master FC100 Bedienungsanleitung

Operation of Your Treadmill
Getting familiar with the control panel
Console
■

Getting Started:

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor hood. Ensure that the
safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then
the Time and Distance windows will display Odometer readings for a short time. The
Time window will show how many hours the treadmill has been in use and the Distance
window will show how many Kilometers (or Miles if the treadmill is set to english readings;
see maintenance for changing settings) the treadmill has gone. A message will be
displayed showing the current software version. The treadmill will then enter idle mode,
which is the starting point for operation.
93
EN