Integra Ti6 Gebrauchsanweisung Seite 4

EN – ENGLISH
3. The TH-Series (Titanium Headless) is a cannulated, dual threaded, headless bone screw which is offered in 2.5mm
diameter in lengths of 10 to 22mm and 3.0mm diameter in lengths of 14 to 34mm.
4. The TQ-Series (Titanium QuickSnap) is a snap-off solid core screw which is offered in 2.0mm diameter in lengths
of 8 to 16mm and 2.7mm diameter in lengths of 12 to 22mm.
5. The DS-Series (Digital Screw) is a cannulated, threaded bone screw which is offered in a 2.0mm diameter with
lengths of 24 to 50mm.
The system includes instruments (drill bits, drill guides, guide wires, depth gauges, countersinks, bone clamps,
forceps, and screwdrivers) to facilitate the placement of the screws.
Material
All Ti6 screws are made from Titanium Alloy (ASTM F-136). The instrumentation is made from titanium and stainless
steel.
Clinical Indications
The Ti6 Internal Fixation System implants (screws) are intended for fixation of fractures, non-unions, arthrodeses, and
osteotomies of the small bones in the hand and foot. The implants are intended for single use only.
4