Preparation For Use; Instructions For Use - Ottobock 3S80 Gebrauchsanweisung

single components ( ), single components with minimum order quantities
( ) or single-component packs ( ):
Fig. Item No. Quantity Designation
–
–
– –
–
–

5 Preparation for Use

CAUTION
Incorrect alignment, assembly or adjustment
Injuries due to incorrectly installed or adjusted as well as damaged pros­
thesis components
► Observe the alignment, assembly and adjustment instructions.
CAUTION
Use of talcum
Falling, damage to the prosthetic knee joint due to lack of lubrication
► Do not use talcum on the prosthetic knee joint or other prosthesis com­
ponents.
► Inform the patient.
The three-dimensional alignment of the prosthesis socket and the modular
components affects the function of the prosthesis. The patient can only
benefit from the special characteristics of the prosthetic knee joint when cor­
rectly aligned.
The residual limb position, e.g., abduction, adduction and flexion, must be
considered when positioning the socket connector. Proceeding according to
the manufacturer's alignment guidelines is recommended.
Alignment is performed in 2 steps:
• Bench Alignment
• Static Alignment
The prosthesis and prosthetic knee joint are individually adjusted during
dynamic trial fitting.
To select and adapt the 1E90 Sprinter prosthetic foot, a trial prosthesis is
first fabricated followed by the definitive prosthesis by replacing the test foot
adapter (TF: 4R206) with the sport foot adapter (TF: 4R204).
– 1
– 1
– 1
– 1
– 2

Instructions for Use

Quick Reference Guide
Sport Knee Joint
Adjustment Wrench
Pyramid Dome Protector
Kit
Reference number
647G813=all_INT
646D1563=all_INT
–
710H10=2x3
2Z11=KIT
25