Integra Flowable Wound Matrix Gebrauchsanleitung Seite 6

Instructions for Use (continued)
10. Ensure all the mixed material is moved into the 6ml collagen syringe (white plunger).
11. Remove the luer lock connector and the empty syringe while holding the 6ml syringe.
12. Attach flexible injector tip securely to the 6ml syringe.
13. Slowly depress plunger to 3ml to remove air pockets.
14. When dispensing Integra Flowable Wound Matrix, first determine the location of the base of
the wound bed utilizing the flexible injector. Upon dispensing product into the wound, avoid
pressing the injector tip directly against the base of the wound to ensure the product is not
prevented from exiting the flexible injector.
15. Apply Integra Flowable Wound Matrix until the wound is completely filled.
16. After application, use an appropriate secondary dressing to maintain matrix adherence and
protect the wound area. The dressing is determined by wound location, size, depth, volume of
wound exudate and user preference.
17. Change the dressing as needed. Frequency of dressing changes will be dependent upon volume
of exudate produced, type of dressing used and the clinician's need to inspect the wound bed
for signs of infection or healing.
18. On a follow-up visit, inspect the wound for healing. If the wound is not completely filled,
re-evaluate if Integra Flowable Wound Matrix is appropriate for use. Follow instructions for use
for wound bed preparation and product application.
6