Integra Flowable Wound Matrix Gebrauchsanleitung Seite 4

Instructions for Use
1. Always handle Integra Flowable Wound Matrix using aseptic techniques. Inspect all packaging
integrity including protective wrapping, syringes and tip caps. Do not use if packaging is
damaged, or tip cap is missing or not fully attached to syringe. Visually inspect the empty
syringe. Do not use if empty syringe contains cracks or visible particulate matter.
2. Prepare wound bed using standard methods to ensure wound is free of debris and necrotic
tissue. If necessary, surgically debride the wound to ensure the wound edges contain viable
tissue. Peel open all three pouches (dry granulated collagen syringe pouch, empty sterile syringe
pouch and the luer lock connector accessory pouch).
3. Pour saline into sterile container and draw 3.0ml of saline into the empty syringe.
4. Remove tip cap from the 6ml dry collagen syringe and attach luer lock connector to the
collagen syringe.
5. Attach the syringe containing saline to the other end of the luer lock connector.
6. Hold both syringes in your hands securely.
7. Dispense all saline fluid into the dry collagen syringe.
8. Depress plungers back and forth at least 15 times to prepare the Integra Flowable Wound Matrix.
9. Consider the flowable wound dressing mixed when product appearance is consistent and
homogeneous and all the product can be moved from one syringe to the other. Once mixed, it is
recommended to use the product within 30 minutes.
4