Use suitable lifting equipment and ensure that the product is properly
harnessed.
Wear personal protective equipment.
Stay clear of cables and suspended loads.
7. Lower the unit into position.
CAUTION: Crush Hazard
Make sure that the unit cannot roll or fall over and injure people or damage
property.
2.6 Turn the unit to an upright position: Unit with anchoring ring (foot)
This section is applicable for pump units that are delivered with a concrete access cover. The unit is delivered
with the foot attached.
Units with a concrete access cover are delivered in a vertical position, standing upside down on the delivery
pallet.
1. Unload the unit from the truck and put it carefully on a rigid, horizontal surface.
2. Attach a sling around the foot.
3. Raise the lifting hook until the lifting sling is taut.
4. Cut the straps which secure the pump station to the pallet.
en - Original instructions
9