Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Lock the unit access cover.
Use a padlock.
Install a class A or class B concrete cover
1. Position and fix the cover frame in the center of the unit opening.
2. Install the access cover.
Install a Class D cover
NOTICE:
Only pump stations which are designed for Class D can be used in Class D
environments.
The following applies for Class D:
• The design of the concrete slab is the responsibility of the local consultant or contractor.
• The extension must be used with the Class D cover.
• The tank for Class D is blue.
1. Cut off the top of the extension. The arrow in the following figure shows the location of the cut.
1
2
en - Original instructions
1. Recessed notch in cover
2. Tab on pump station
6.5
33
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
