Product Description - Beissbarth MT 826 DT Originalbetriebsanleitung

3.

Product description

3.1 Intended use
The MT 826 DT is a wheel balancing machine
featuring mechanical wheel clamping for the balancing of
car, light van and motorcycle wheels with a rim diameter
of 10'' - 26'' and a rim width of 1'' -
The MT 826 DT is to be used exclusively for this
purpose and solely for the range of applications
specified in these instructions. Any other purpose is not
consistent with the intended use and is therefore not
permissible.
!
The manufacturer cannot accept any liability for
possible damage arising from improper use.
!
* These dimensions refer to standard rims (A);
1)
for rims with a special shape (B - C), special
accessories should be used.
A
B
C
Fig. 1: Rim types
3.2 Prerequisites
The MT 826 DT must be installed on a flat surface
made of concrete or similar material and anchored in
position.
!
An uneven or vibrating surface can lead to
inaccurate imbalance measurements.
!
Any non-contiguous floor covering or deviation from
the above-mentioned safety requirements releases
the manufacturer from all liability for damage to
objects and/or personal injury.
Beissbarth GmbH
3.3
20''.
Fig. 2:
Designation
1
2
3
4
5
6
Fig. 3:
Designation
3.1 Quick locking nut
3.2 Spacer ring
3.3 Concave socket
3.4 Basic centering flange
3.5 Allen key
3.6 Centering cone 42 – 65 mm
3.7 Centering cone 54 - 80 mm
3.8 Centering cone 75 - 110 mm
Product description | MT 826 DT | 35
Scope of delivery
6 2
4
3
5
Scope of delivery
Wheel guard
Wheel guard Supporting arm
Conical quick-release coupling
Monitor
Support arm
Equipment
Conical quick-release coupling
en
1
Order number No.
1 695 600 528 1
1 695 600 526 1
1 695 602 400 1
1 695 000 230 1
1 695 907 007 1
- 1
Order number No.
1 695 654 361 1
1 695 616 100 1
1 695 616 500 1
- 1
1 695 635 000 1
1 695 632 500 1
1 695 652 862 1
1 695 605 600 1
|
1 695 600 575 2016-08-23