Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
28 | MS 80 | User information
2.
User information
2.1
Important notes
Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Beissbarth Tire Equipment". These instructions must be
carefully studied prior to start-up, connection and opera-
tion of the MS 80 and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Beissbarth Tire Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the MS 80 and must always be heeded.
2.3
Electromagnetic compatibility (EMC)
The MS 80 is a class A product as per EN 61 326.
|
1 695 301 988
2011-04-04
3.
Product description
3.1
Designated use
The MS 80 is a modern tire changer for mounting and
demounting of truck, bus, industrial vehicles, agricultu-
ral vehicles and earth moving machines tires.
i
MS 80 has to be used exclusively for the specified
purpose and only in the functioning scope shown in
these instructions. Any other use different from that
specified has to be considered improper and there-
fore not allowed.
i
The manufacturer is not liable for any damage
caused by improper use.
3.2
Requirements
The MS 80 has to be installed on an even surface made
of concrete or similar materials, and has to be firmly
anchored.
3.3
Delivery specification
Denomination
MS 80
Bead lifting lever
Rim clamps
3.4
Special accessories
Denomination
Nylon protections
Clamps (2 pieces)
Bead wires and clamps lever
60'' rim jaws extension
Pneumatic bead pressing device SPT9
Tubeless roller
Order code
1 695 300 094
1 695 300 099
Order code
1 695 301 575
1 695 300 098
1 695 102 683
1 695 301 606
1 695 103 526
1 695 300 102
Beissbarth GmbH
Werbung
Kapitel
Inhaltsverzeichnis
