Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Beissbarth MT 826 DT Originalbetriebsanleitung

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the
consequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Beissbarth GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | MT 826 DT | 33
Warning Position on the product
symbol Nature of danger / Work instructions
The position of the warning symbol on the product is to
guarantee perfect readability.
The warnings on the machine can divided into notes
on residual risks (yellow/black triangle) and additional
work instructions.
Back of machine
The following information can be found here:
Machine model, 10-digit ID number, voltage (V),
frequency (Hz), connected load (kW), amperage (A),
max. supply pressure (kPa), degree of protection (IP),
year of manufacture, CE mark, EAC identifier, serial
number of the machine, barcode.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
EAC mark
¶
Confirms the suitability of the machine for
Russia.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter "Checking the direction of
rotation")
Back of the machine
¶
Indication of the operating voltage.
¶
Heed the information on the rating plate.
¶
The plate shown above is an example only; the
voltage listed here depends on the electrical version
of the machine.
en
|
1 695 600 575 2016-08-23