Beissbarth MT 826 DT Originalbetriebsanleitung Seite 46

en 46 | MT 826 DT | Program structure
8.3 Settings and service
Call-up of service menu (customer service only)
Call-up of calibration menu
Press < I > to return to the previous page.
Settings (customer service only)
User-defined settings
i
The following symbols are used in the selection
menus:
Automatic transfer (e.g. time)
Manual transfer (e.g. via pedal)
Function deactivated
8.3.1 Calibration
Calibration with "Go" wheel.
Flange calibration.
Press < I > to return to the previous page.
Electronic Vernier caliper and Angular width gauge
calibration.
|
1 695 600 575 2016-08-23
8.3.2 Settings
Activates or deactivates the electronic vernier caliper
and the Angular width gauge.
Press < I > to return to the previous page.
Positioning of adhesive weight (electronic vernier caliper,
manual vernier caliper (3, 6 or 12 o'clock).
8.3.3 User-defined settings
Activates or deactivates
the screen saver
Activates or deactivates
acoustic acknowledgement signal
Language selection.
Activates or deactivates automatic start (start of
measurement by closing wheel guard)
Press < I > to return to the previous page.
Selection of weight display
grams (g) or ounces (oz)
Selection of weight resolution
1 g / 0.05 oz or 5 g / 0.25 oz
Residual value suppression:
Entry of weight value below which the
value "0" is to be displayed.
Beissbarth GmbH