Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Beissbarth MS 80 Originalbetriebsanleitung

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal Probability of
word occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION
Possible dangerous
situation
Below you will see an example of the "Live parts"
warning notice by way of example, with the signal word
DANGER:
DANGER – Exposure of live parts on open-
ing the MS 80!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
€
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
€
Disconnect MS 80 from the mains before
opening.
1.1.2

Symbols in this documentation

Sym- Designation Explanation
bol
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step op- Instruction consisting of several steps
2. eration
One-step oper- Instruction consisting of one step.
e
ation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
Beissbarth GmbH
Severity of danger
if instructions not
observed
Death or severe
injury
Death or severe
injury
Minor
injury
Symbols used | MS 80 | 27
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible!
Mains tension
Danger of electrical shock when touching the
parts of the electrical system.
Wheel unlocking
Danger of crushing in the area close to the
wheel locking assembly.
Working arm fitting
Danger of crushing in the area close to the
working arm.
Working arm tilting
Danger of crushing in the area close to the
working arm.
en
|
1 695 301 988 2011-04-04