Futurelight CP-512 MST Bedienungsanleitung Seite 47

If you are setting such a channel of your unit, on which the glow-lamp can be switched on or off, these
th th
values can be given with the 7 and 8 potentiometer. If you do not want to give any lamp value, press the
DELETE button.
Press ENTER to advance to the reset function
Unit channel reset setup:
th th
If you are setting such a channel of your unit, which has a reset value, use the 7 and 8 potentiometer.
Consequently, simply a reset command can be given to the units with the reset function in automatic mode.
If you do not want to give any reset value, press DELETE. Press ENTER to advance to the type setup.
Setup of unit channel types:
Here the channels can be divided to different domains. The channels can be traced exactly on the display
th th
which effects appear on them. Give the name of the first type, then its maximum value with the 7 or 8
potentiometer, then press ENTER and you can set the name of the next type. In case of a unit a maximum of
96 type scales can be set but it is probably enough for the unit with all 32 channels. In case of the last type
the maximum value of 225 has to be set within a channel! There is another option as well; the percentage
indication. If it is about a continuously controlled channel, e.g. dimmer, focus, then you can set the channel
to indicate the percentage, then in manual mode its value appears in percent. This can be switched on and
off by pressing the GROUP1 button.
If you have set the assignment of the channel type, press ENTER. The controller is restored to the NAME
parameter, and a colon will be flashing in front of the channel number. The setup of a channel is completed
this way.
A new channel can be added by pressing the NEW button, then the controller automatically skips to name
edition and this channel can be set as well as described above. You can go up to 16 channels, the controller
is able to control as many within one unit. It is possible to delete a channel with the restriction that always the
last channel can be deleted with the DELETE button.
You can log off from the unit construction by pressing the ESC button repeatedly. The controller asks for the
confirmation to save the modification.
By pressing the ESC again you can return to the menu from the unit selection.
MENU 1: SHAPE EDITION
With the shape generator, located in the controller, you can have 8 different shapes drawn by the mirrors or
the head of the units, giving quite a number of parameters. These shapes can be assigned to program steps
or preset scenes.
47/62 00039725.DOC, Version 1.1