GE VAT300 Kurzanleitung Seite 31

5-3 Block-B parameters
No.
B00 – Output rating (V/f control)
Rated input voltage
0
setting
Max./base frequency
1
simple setting
2 Motor rated output
3 Motor rated voltage
4 Max. frequency
5 Motor Base frequency
6 Motor rated current
Carrier frequency
(Small size
7
N045K0
X055K0)
Carrier frequency
(Large size
7
X475K0)
Downloaded from www.Manualslib.com
Parameter Min.
1.
When this data is changed,
the output voltage data will
be changed to the same
value.
0.
0.10
39.
Fbase
or 3.00
Fmax/7
or
1.00
Inverter
Inverter
rating
× 0.3
: from N000K7 to
1.0
: from X000K7 to
1.0
: from X075K0 to
manuals search engine
Default
Max.
(Unit)
Select the rated input voltage from the
7. 7.
following table.
setting
1 200V
2 200V
3 220V
4 220V
5 230V
6 240V
7 230V
Select the output frequency rating from the
9. 1.
combination below.
Value Fbase[Hz] Fmax [Hz]
Free setting on B00-4 and
0
B00-5
1 50
2 60
3 50
4 50
Inverter
The motor rated output at the base
750.00
frequency is set.
rating(kW)
DC-AVR does not operate when set to 39.
The input voltage equals the output voltage at
the base frequency.
DC-AVR operates so that the set voltage is
230.
attained at the base frequency when not set to
or
39.
480.
400.
When the rated input voltage setting
(V)
(B00-0) is changed, this data is also
changed to the rated input voltage value.
This cannot be set above the rated input
voltage.
Fbase
50.00
*7 or
(Hz)
When "B00-1" is a value other than 0, this
440.00
will be rewritten with the data set in the
Fmax
simple setting.
50.00
or
(Hz)
440.00
Inverter This is the reference value for the
rating overcurrent limit, OLT, current % display,
rating
(A) analog input and output.
The noise can be lowered by changing the
PWM carrier frequency and control method,
and changing the sound of the magnetic
noise generated from the motor. This can
be changed while running.
1.0 to 15.0: Monotone sound method
21.0 17.0
(Carrier frequency: 1.0 to 15.0kHz)
15.1 to 18.0: Soft sound method 1
(Basic carrier frequency: 2.1 to 5.0kHz)
18.1 to 21.0: Soft sound method 2
(Basic carrier frequency: 2.1 to 5.0kHz)
1.0 to 8.0: Monotone sound method
(Carrier frequency: 1.0 to 8.0kHz)
8.1 to 11.0: Soft sound method 1
14.0 10.0
(Basic carrier frequency: 2.1 to 5.0kHz)
11.1 to 14.0: Soft sound method 2
(Basic carrier frequency: 2.1 to 5.0kHz)
EN-29
Change is possible
Function
during operation.
200V system 400V system
Power supply Power supply
voltage voltage
to 200V 380V to 380V
to 200V 400V 381 to 400V
201 to 220V 415V 401 to 415V
201 to 220V 440V 416 to 440V
221 to 230V 460V 441 to 460V
231 to 240V 480V 461 to 480V
221 to 230V 400V 381 to 400V
Value Fbase [Hz] Fmax [Hz]
5 50
6
60
50 7
60
60 8
60
9
60
60
75
100
70
80
90
120
○
○