WMF Fusiontec Perfect Premium Bedienungsanleitung Seite 37

2. Take the seal ring
by hand.
ars
Soak lightly sticking food, bring strong sticking
3.
foods to a boil with some water in the pressure
cooker.
Clean valves from dirt and/or clogging with a
4.
moist cotton swab.
n
▶
Do not use any sharp or pointy objects.
er
The pot, inserts and trivet can be cleaned in
5.
the dishwasher.
for
▶
However, this can lead to discolourations of the
l 1
surface. This does not impair function.
10
▶
Nonetheless, we recommend cleaning by hand.
If lime develops bring vinegar-water to a boil
6.
in the pressure cooker.
s
7. Dry the cooking utensils well after cleaning.
ods
8.2 Storage
Keep the clean, dry pressure cooker in a clean,
dry and protected environment.
1. Remove lid
Remove seal ring
2.
separately to protect it.
3. Remove lid handle
5.1 and place in the pot
-
4. Place the lid
8.3 Maintenance / replacing wear parts
der
/ Side handle and handle only to be replaced by
hake
WMF Trade / Service team.
/ Safety valve only to be replaced by WMF Trade
/ Service team, and at the latest before 10
years have elapsed.
/ Check wear parts regularly and replace for
r
original parts if necessary.
/ Replace seal ring and double seal if they are
teel
damaged, hardened, discoloured or if they no
longer fit properly.
er
8.3.1 Replace seal ring
e
1. Remove lid
80 5800 6330 | 001
Operating Instructions
out of the lid
L 6
as described in Chapter 5.1.
6
from the pot rim and store
L
as described in Chapter
B
and/or lid
1
upside down on the pot
6
as described in Chapter 5.1.
6
and wash 2. Turn over lid
3. Remove defective seal ring
rim and dispose of it.
4. Insert new original seal ring
pot's rim and carefully press under the rim.
▶
The seal ring
below the curved pot rim.
8.3.2 Replacing double seal
If necessary, remove lid
1.
described in Chapter 5.1.
2. Take apart the lid (see image series G), by
turning the lid over
3. Hold the lid
device
Remove handle
4.
Remove the double seal
5.
and dispose of it (see Image J).
B
Carefully position the new original double
6.
seal
I
▶
The double seal
valve.
▶
The arrows on the double seal
handle base must point towards each other.
▶
The double seal
.
6 flat against the handle base.
▶
. The double seal
1
the handle's sealing lip
of the sealing lip lies over the seal edge.
.
6
L
L
must be positioned fully
L
from the pot as
6
.
6
and press the handle locking
6
towards the end of the handle.
E
.
B
from the handle
L
.
cannot cover any other
L
must be gap-free and lay
I
must be situated under
L
so that the curve
K
EN
from the pot
into the
and the
I
35