Legal Information - Ottobock 4R118 Gebrauchsanweisung

Mounting the socket adapter
► To connect the adapter plate to a socket adapter, use 501S41=M6x16
countersunk screws.
Recommended tools:
>
710D4 torque wrench, 636K13 Loctite®
1) If the pyramid receiver or the pyramid adapter is rotatable: Place
the pressure plate on the adapter.
2) Place the adapter on the connecting component.
3) Optional: Align the pyramid receiver or the pyramid adapter.
4) Secure the screws with Loctite®.
5) Screw in the 2 posterior countersunk head screws and tighten them
(mounting tightening torque: 12 Nm).
6) Screw in the 2 anterior countersunk head screws and tighten them
(mounting tightening torque: 12 Nm).
6 Cleaning
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
► The prosthetic components should be inspected after the first 30 days of
use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
8 Disposal
This product may not be disposed of with regular domestic waste in all juris­
dictions. Disposal that is not in accordance with the regulations of the coun­
try where the product is used may have a detrimental impact on health and
the environment. Please observe the information provided by the responsible
authorities in the country of use regarding return, collection and disposal
procedures.

9 Legal Information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
Ottobock | 13