Testing The Potentiometer Adjustment - Dürkopp Adler M-Type 869 Serviceanleitung

2.15.3

Testing the potentiometer adjustment

46
–
Press down and hold "P" and switch the main switch on.
–
Access the technician level.
–
Select parameter "F-188".
–
Press "E".
The current speedomat level and the relevant speed limit are
displayed.
–
Set the adjusting wheel 1 to "lowest stroke height".
Speedomat level 06 must be displayed on the screen.
–
Set the adjusting wheel 1 to "maximum stroke height".
Speedomat level 21 must be displayed on the screen.
"EEEE" appears on the screen for the speed.
Important
If speedomat levels 07 and 21 are not reached the potentiometer must
be reset.
1