Oil Lubrication - Dürkopp Adler M-Type 869 Serviceanleitung

2.16 Oil lubrication

Caution: Danger of injury!
Oil can cause skin rashes.
Avoid excessive contact with the skin.
Wash thoroughly after contact.
IMPORTANT!
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Ensure that you do not spill any oil.
Only use lubrication oil DA 10 or a similar oil with the following
specifications to lubricate the special sewing machine:
–
Viscosity at 40° C:
–
Flash point:
DA 10 can be bought at the sales points of DÜRKOPP ADLER AG
under the following parts numbers:
200 ml container:
1 litre container:
2 litre container:
5 litre container:
1
Lubricating the upper part of the machine
–
The upper part of the machine is fitted with a central oil wick
lubrication system. All bearing points are supplied from the oil
supply container 1.
–
The oil level must not go below the "MIN" mark.
–
Fill with oil up to the "MAX" mark through the hole in the
inspection glass.
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
GB
47