General Information - Dürkopp Adler M-Type 869 Serviceanleitung

An bauanleitung pneumatische Füsschenlüftung FLP 14-1
In struc tions for fitting pneumatic sewing foot lift FLP 14-1
1.

General information

1.1 Scope of delivery
Aus ga be/Edi ti on:
10. 2006
Bausatz / Kit 0867 590354
ATTENTION!
The operating pressure for the class 876 is 6 bar. Should the
pressure of your supply line be higher than 6 bar, it has to be
reduced to 6 bar at the supply unit of the sewing machine!
Before beginning the installation :
Please check whether you have all the components needed for
the retrofit kit listed in the scope of delivery.
The complete retrofit kit for the pneumatic sewing foot lift with the
part number 0867 590354 consists of the following components:
Component
1x Bars
1 x Connection Wi-E
2 x Connection GD-E
1 x Silencer
1 x Connection Wi-N
1 x Fastening clamp
1 x Fillister head screw M4x10
2 x Cable tie
3 m Hose
1 x Pneumatic sewing foot lift
consisting of :
1 x Lock washer
1 x Cylinder
1 x Throttling screw
1 x Piston
1 x Lippenring
1 x Shoulder screw
0,3m Hose
1 x Connection Wi-N D3
Prin ted in Fe de ral Re pub lic of Germany
Tei le-Nr./ Part-No.:
0791 867704
Parts number
0667 135294
9790 201001
9790 200001
9710 982005
9790 010010
9840 120026
9204 201667
9840 121002
9731 005004
0667 135204
9357 000070
0367 135170
0367 135214
0367 135530
9742 330120
0367 135200
9731 005004
9790 010010
Blatt: 5 von 8
Sheet from