Basic Setting With V810 Or V820 Control Panel - Dürkopp Adler M-Type 869 Serviceanleitung

2.15.2

Basic setting with V810 or V820 control panel

2
Caution: Danger of injury!
The potentiometer is adjusted when the main switch is on.
Work with appropriate precautions.
–
Undo the locking screw 1 for the potentiometer 2.
–
Press down and hold "P" and switch the main switch on.
–
Access the technician level.
–
Select parameter "F-188".
–
Press "E".
The current speedomat level (e.g. 11) and the relevant speed limit
(e.g. 2480) are displayed.
–
Turn the potentiometer shaft until speedomat level 07 and the
relevant maximum speed of 2800 rpm are displayed on the screen.
–
Screw in locking screw 1.
–
Check the adjustment.
1
GB
45