Tilting Back The Machine Head - Dürkopp Adler M-Type 869 Serviceanleitung

8.

Tilting Back the Machine Head

32
1
Caution Crushing Hazard!
Do not reach between the base and the machine arm while tilting back
the machine head.
Tilting back the machine head
–
Pull lever 1 upwards.
The locking mechanism is then released.
–
Tilt the machine head 2 cautiously to the rear.
Re-closing the machine head
–
Tilt the machine head 2 forwards.
The head tilts back to the position shown in the illustration below.
–
Pull lever 1 upwards and cautiously tilt the head downwards.
Attention !
Only tilt the machine head up for a short period (for example for
maintenance work).
If the machine head is tilted back for a longer period (for a night or
weekend), oil can leak out in the hook area.
2
1