Field Of Application - PETZL FALCON ASCENT Bedienungsanleitung

Only the techniques
shown in the diagrams
that are not crossed out
and/or do not display
a skull and crossbones
symbol are authorized.
Check our Web site
regularly to fi nd the
latest versions of these
documents: www.petzl.
com
Contact PETZL if you
have any doubt or
diffi culty understanding
these documents.
2
Nomenclature of parts
Seat harness
(1) Belt, (2) Two textile
loops constituting the
EN 813 ventral attachment
point, (3) EN 358 lateral
belt attachment points,
(4) EN 358 rear travel
restraint attachment
point, (5) Rear buckle
for attaching a chest
harness, (6) DoubleBack
adjustment buckles,
(7) Equipment loops,
(8) Slot for tool carrier,
(9) System for stowing
excess webbing,
(10) Adjustable elastics,
(11) Marking label
that stows in the belt
reinforcement.
Principal materials
- Polyester, nylon (textile),
- Steel (adjustment
buckles).
3
Inspection, points to verify
Before each use
Check the webbing at the attachment points, at the
adjustment buckles and at the safety stitching.
Look for cuts in the webbing, wear and damage due
to use, to heat, and to contact with chemical products,
etc. Be particularly careful to check for cut threads.
Verify that the DoubleBack buckles operate properly.
During each use
It is important to regularly inspect the condition of
the product. Make sure that all pieces of equipment
are properly connected and positioned with respect to
each other.
Consult the details of the inspection procedure to be
carried out for each item of PPE on the Web at www.
petzl.com/ppe or on the PETZL PPE CD-ROM.
Contact PETZL if there is any doubt about the
condition of this product.
2
FALCON ASCENT C385020C (290509)
1

Field of application

This equipment is personal
protective equipment (PPE).
Seat harness, work positioning
belt, harness for ascending
rope.
This harness is not suitable for
progression using rock climbing
techniques.
This product must not be loaded
beyond its strength rating,
nor be used for any purpose
other than that for which it is
designed.
4
Verify that this product is
compatible with the other
elements of the system in your
application (compatible = good
functional interaction).
An incompatible connection can
cause accidental disconnection,
breakage, or affect the safety
function of another piece of
equipment.
Any equipment attached to
your harness (anchors, locking
connectors, absorbers etc.)
must conform to current
standards.
WARNING Failure to heed any of these
warnings may result in severe
Activities involving the use of
injury or death.
this equipment are inherently
dangerous.
Responsibility
You are responsible for your
WARNING, specifi c training
own actions and decisions.
in the activities defi ned in the
Before using this equipment,
fi eld of application is essential
you must:
before use.
- Read and understand all
This product must only be used
instructions for use.
by competent and responsible
- Get specifi c training in its
persons, or those placed under
proper use.
the direct and visual control of
- Become acquainted with its
a competent and responsible
capabilities and limitations.
person.
- Understand and accept the
Gaining an adequate
risks involved.
apprenticeship in appropriate
1
2
3
9
6
7
8
10
Compatibility
techniques and methods
of protection is your own
responsibility.
You personally assume all
risks and responsibilities for all
damage, injury or death which
may occur during or following
incorrect use of our products in
any manner whatsoever. If you
are not able, or not in a position
to assume this responsibility or
to take this risk, do not use this
equipment.
11
5
4