PETZL FALCON ASCENT Bedienungsanleitung Seite 4

6
WORK POSITIONING and RESTRAINT
EN 358: 2000 harness for work
positioning and restraint
These attachment points are designed only
to either hold you in position at the work-
post, or to prevent you from entering a zone
where a fall is possible.
These attachment points must only be used
to attach to a restraint or work positioning
system, maximum fall height: 0.5 m.
These attachment points are not designed
for fall arrest usage. It may be necessary
to supplement work positioning or travel
6A.
6B.
4
FALCON ASCENT C385020C (290509)
restraint systems with collective or personal
fall arrest systems.
6A. Lateral belt attachment points
Always use the two lateral attachment points
together by linking them with a positioning
lanyard in order to be comfortably supported
by the waistbelt. Verify that the connector is
properly closed and locked.
6B. Rear travel restraint attachment point
GRILLON
EN 358
Maximum height
of fall : 0,5 m