Yale YMT1-15 Originalbetriebsanleitung Seite 21

21
When transporting loads ensure that the load does not swing or come into contact with other objects.
Excessive inching operation by short and frequent actuation of the control switch should be avoided.
Do not use the hoist/trolley for the transportation of people
Welding on hook and rope is strictly forbidden. The rope must never be used as a ground connection during welding.
The wire rope must not be used for lashing purposes (sling rope).
Do not pull the rope over edges.
Do not tie knots in the rope or extend or shorten it by using rope clamps, screws or similar. Ropes must not be repaired.
The loose end of the rope must not be used for attaching loads.
The load must not be moved into areas which are not visible to the operator. If necessary, he must seek help.
Any modification of the lifting device is prohibited. A unit modified without consulting the manufacturer must not be used.
Turning of loads under normal operating conditions is not allowed. If loads must be turned in normal operation, an anti-twist swivel must
be used or the manufacturer must be consulted.
©
2019 Columbus McKinnon Industrial Products GmbH