Copying From A Cd Onto The Hdd; Copying All Tracks On A Cd - Yamaha CDRHD1500 Bedienungsanleitung

Copying all tracks on a CD

You can copy all tracks on a CD onto the HDD.
COPY
HDD/CD RECORDER
HDD CDR COPY
A.M.Q.R.
OPEN/CLOSE
COPY A. M. Q. R. TIMER REC REC
COPY
FINALIZE ERASE INPUT
REPEAT RANDOM INTRO TEXT/TIME
A B C D E F G H I
1 2 3
J K L M N O P Q R
4 5 6
S T U V W X Y Z
7 8 9
SPACE SYMBOL BOOKMARK
0 10
MODE MENU
1.
Set the CD in the disc tray.
This unit starts reading the information (type and capacity of
the CD) when the CD is loaded.
The following message appears during reading (the process
may take 10 to 20 seconds depending on the disc condition).
R e a d i n g
When reading the information has been completed, the display
changes as follows, and this unit becomes ready for operation.
Total number of tracks
1 4
1
2.
Press COPY once.
The following message appears on the display, and this unit
enters the HDD copy standby mode. Copying has not been
started yet at this stage.
26

COPYING FROM A CD ONTO THE HDD

MULTI JOG
PUSH ENTER
TEXT/TIME MODE
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
w/d
ENTER
COMPLETE CLEAR
TRACK NO.
WRITE
HDD
CDR
GROUP SKIP
L
dB –30 –10 –6 –2 0
R
Total time
6 8 1 7
L TOC GROUP
dB –30 –10 –6 –2 0
CD
R
L TOC GROUP
dB –30 –10 –6 –2 0
CD
R
Memo
• In the HDD copy standby mode, you can specify the settings
for HDD copy. For details, refer to "Setting the HDD copy
mode" (P.28) and "Settings HDD copy menu" (P.29).
• You can specify a disc to where data is copied. For details,
refer to "Selecting a target disc" (P.28). (When no disc is
specified, the unit automatically selects the smallest disc
MENU
number that does not contain any data.)
CLEAR
H D D
0 0 1
3.
Press w/d to start copying.
The progress of the copy process is shown in the display.
0 0 1
The unit applies the following settings (default) if the HDD
copy menu settings (P.29) are never changed.
W/D
• Copy Method:
• Copy Level:
• Copy Speed:
Memo
• It takes a few seconds for this unit to become ready to start
copying after w/d has been pressed.
• This unit may create some vibration and rotation noise while
performing the copying process by rotating a CD at high
speed.
To cancel copying, press a.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
CD TEXT
If the CD to be copied contains CD TEXT that can be copied,
CD TEXT is automatically copied when the CD is copied onto
the HDD.
Output of the signals during copying
• During copying at 1x speed, signals are output both from the
ANALOG LINE OUT (PLAY) jack and from the DIGITAL
OUTPUT (OPTICAL/COAXIAL) jacks.
• During copying at 2x speed, signals are output only from the
ANALOG LINE OUT (PLAY) jack.
• During copying at other than 1x or 2x speed, signals are
output neither from the ANALOG LINE OUT (PLAY) jack
nor the DIGITAL OUTPUT (OPTICAL/COAXIAL) jacks.
π C D - R W
DIG L TOC GROUP
dB –30 –10 –6 –2 0
ALL SYNC CD
R
1 π 1 0 0 0
DIG L TOC GROUP
dB –30 –10 –6 –2 0
ALL SYNC CD
R
1 π 1 0 0 1
L
DIG TOC GROUP
dB –30 –10 –6 –2 0
CD
ALL SYNC
R
"Digital Copy"
0dB
"Best Effort"
REC
REC
REC