Adding Track Markers During Recording (Manual Track Marking) - Yamaha CDRHD1500 Bedienungsanleitung

Adding track markers during recording (Manual track marking)

ER
COPY
A.M.Q.R.
This unit can automatically place track markers. However you can
also manually place track markers during recording. (Manual track
marking)
Press TRACK NO./BOOKMARK (TRACK NO. WRITE on
the remote control) during your recording.
• A new track number is added at the location on the disc
corresponding to the time TRACK NO./BOOKMARK (TRACK
NO. WRITE on the remote control) is pressed.
• Manual track marking is possible after the recording has been
performed for 5 seconds from the beginning of the track, and a
disc cannot contain more than 99 tracks. Even if there is time
remaining on the disc, further recording is impossible once 99
track markers have been placed.
TRACK NO./BOOKMARK
MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
Memo
• The track markers may not be placed properly even if the
recording has been performed in the synchronized recording
according to the type of the source devices. To avoid this
problem, place the track markers manually.
• Manual track marking is possible even during synchronized
recording.
• You can place the track markers to the tracks that have been
recorded on the HDD by dividing the track. For details, refer to
"Track Divide" (P.62).
0 10
MODE MENU
ENTER
COMPLETE CLEAR
TRACK NO.
WRITE
HDD TRACK NO.
WRITE
CDR
GROUP SKIP
3
37