Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
......................................................RECORDING FUNCTIONS
REC Mute
REC MODE
COPY
COPY
OPEN/CLOSE
A
FADE IN/OUT
REC MUTE
REC
REC MODE FINALIZE
DISPLAY
A/B
TIME
TEXT
Press REC MUTE to create a blank space at the end of
recording. A 4-second blank space is recorded, and this
unit enters the record pause mode. To create a blank space
longer than 4 seconds, press and hold REC MUTE.
When REC MUTE is released, this unit enters the record
pause mode. During the REC MUTE operation, the REC
indicator blinks.
Fade In/Fade Out Function
This unit has a fade-in function to gradually rise the
recording level at the start of recording and a fade-out
function to gradually lower the recording level at the end of
recording.
Fade In
While this unit is in the record pause mode, press REC to
start a recording with a fade-in. During this recording, the
REC indicator blinks in the display.
Fade-in lasts about 3 seconds. However it is possible to
adjust the fade-in time between 1 and 10 seconds in the
menu settings.
Fade Out
Press REC during recording to end the recording with a
fade-out. This unit enters the record pause mode when
fade-out recording is complete. Fade-out time can also be
adjusted in the menu settings.
MULTI JOG
INPUT
PUSH MODE
TRACK NO.
DISC A
DIGITAL ANALOG
FINALIZE
ERASE
DIGITAL REC LEVEL
B
DISC
Recordable
ReWritable
ANALOG REC LEVEL
REC MUTE
REC
FADE IN/OUT
MIN
MAX
REC MUTE
B
TRACK NO.
WRITE
REC MUTE
ERASE
INPUT
DIMMER
To change the fade-in and fade-out time
1.
While this unit is in the record or stop mode,
press and rotate the MULTI JOG knob (MENU
and +/– on the remote) to select "FadeIn time" or
"FadeOutTime" in the set menu.
2.
Press the knob (MENU on the remote) again and
rotate the knob (+/– on the remote) to set the
desired time between 1 and 10 seconds.
3.
Press the MULTI JOG knob (MENU on the
remote) again to enter the time setting. This
setting remains even when the power is turned
off.
CD TEXT Copying and Editing
This unit is CD TEXT compatible. When digitally recording a
disc with CD TEXT data, the data is automatically recorded
onto the disc loaded on the disc tray B. It is also possible to
edit CD TEXT data on the newly recorded disc.
CD TEXT copying
CD TEXT data is automatically copied as the source CD is
recorded, when recording a source CD with CD TEXT data
(23 characters maximum) placed on the disc tray A onto a
disc placed on the disc tray B with DISC A selected using
INPUT, or with the CD DIRECT copy function. To save the
CD TEXT data on the disc, perform finalization. CD TEXT
data is displayed by pressing TEXT/TIME on the front panel
(TEXT on the remote). See page 10 for details.
CD TEXT copying cannot be made when doing manual
recording.
TEXT/TIME
DISPLAY A
TEXT/TIME
DISPLAY B
PHONES
LEVEL
MIN
MAX
Note
•
Some CD TEXT data cannot be copied if they are protected by
copyright.
COPY
A
OPEN/CLOSE
B
FADE IN/OUT
TRACK NO.
REC
REC MUTE
WRITE
REC MODE FINALIZE
ERASE
DISPLAY
A/B
INPUT
TIME
TEXT
DIMMER
TEXT
19
E-
Werbung
Kapitel
Inhaltsverzeichnis
