Setting The Cdr Copy Mode - Yamaha CDRHD1500 Bedienungsanleitung

COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC

Setting the CDR copy mode

In the CDR copy mode, you can specify the number of tracks to be copied on the HDD or enable/disable the auto-finalization feature.
Initial setting: All Synchro
ER
COPY
A.M.Q.R.
1.
Press MODE while this unit is in the CDR copy
standby mode (P.38, 40).
2.
Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the CDR copy mode.
Choose one of the modes listed below.
All Synchro (All-synchronized copying mode)
This mode copies all of the material from a single audio source
at the same time as the source programs are being played.
Track markers are automatically placed between the tracks
being recorded.
Full Auto (Full auto-synchronized copying mode)
This mode automatically performs finalization after all
synchronized copying is complete. A CD-R disc can be played
as a CD as soon as finalization has been completed.
Note
CD TEXT is copied only when selecting "Full Auto" in the
CDR copy mode for a new CD-R or CD-RW disc.
Multi Synchro (Multi-synchronized copying mode)
This mode copies the set number of tracks at the same time as
the source programs are being played. The number of tracks to
be recorded can be set in the range of 1 to 99 tracks. This mode
is convenient to record a mix of tracks from different sources.
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the CDR copy mode selected.
If "All Synchro" or "Full Auto" is confirmed, this unit returns
to the CDR copy standby mode.
If "Multi Synchro" is confirmed, the following message
appears on the display. Go to step 4.
H o w m a n y ?
MULT
42
MODE MULTI JOG
MULTI JOG
PUSH ENTER
TEXT/TIME MODE
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN
1
REC
L
dB –30 –10 –6 –2 0
SYNC ANLG CDR
R
MENU
CLEAR
MAX
4.
Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the number of tracks.
The number can be selected in the 1 to 99 tracks range.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the number selected.
This unit returns to the CDR copy standby mode (P.38, 40).
6.
Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select the group and track to start
copy from.
While the GROUP indicator lights, you can select a group, and
while the TRACK indicator lights, you can select a track. For
details, refer to "SELECTING THE GROUP OR TRACK
MODE" (P.15).
To start copying all tracks from a group, follow step 3 in
"Copying all tracks in a group to a disc" (P.38).
To start copying selected tracks from the HDD, follow
step 3 in "Copying selected tracks on the HDD" (P.40).
0 10
MODE
MODE
H, G
ENTER
COMPLETE
TRACK NO.
WRITE
HDD
+, –
CDR
MENU
ENTER
CLEAR