Recording From An External Component Onto The Hdd; Recording Input Audio Source - Yamaha CDRHD1500 Bedienungsanleitung

RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD

Recording input audio source

You can make recordings from the component such as a cable TV tuner or DVD player connected to this unit.
Notes
• This unit cannot input digital signals other than PCM signals.
• Sources input from external components cannot be recorded on to a CD-R or CD-RW directly.
Memo
Recording onto the HDD is made in the unit called "disc". The maximum length of one disc on the HDD is 179 minutes 59 seconds. If the
recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.
HDD/CD RECORDER
HDD CDR COPY
A.M.Q.R.
1.
Press REC while the HDD is selected (P.14).
The HDD mark flashes, and the disc and track numbers to be
recorded are indicated on the display. Recording has not been
started yet at this stage. (HDD recording standby mode)
D 0 0 2 1
Disc number to be Track number to be recorded
recorded
Memo
• In the HDD recording standby mode, you can specify the
settings for HDD recording. For details, refer to "Setting the
HDD recording mode" (P.35).
• You can specify a disc to where data is copied. For details,
refer to "Selecting a target disc" (P.28). (When no disc is
specified, the unit automatically selects the smallest disc
number that does not contain any data.)
2.
Select the input source to be recorded.
The lamp for the selected input (OPTICAL, COAXIAL, or
ANALOG) lights.
3.
Adjust the recording level.
The adjustment of the digital recording level is not normally
necessary. However it is possible to adjust the recording level
(P.34) to suit your needs.
4.
Press w/d to start recording.
D 0 0 2 1
w/d
MULTI JOG
PUSH ENTER
TEXT/TIME MODE
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN
REC INPUT
0 0 0
REC
L GROUP
dB –30 –10 –6 –2 0
SYNC
R
0 0 1
REC
L
dB –30 –10 –6 –2 0
SYNC
R
OPEN/CLOSE
COPY A. M. Q. R.
REC
FINALIZE ERASE
MENU
INPUT
CLEAR
REPEAT RANDOM
A B C
1
J K L
MAX
4
S T U
7
a
SPACE
0
MODE
5.
Start playing the source.
Press w/d to stop recording temporarily. The HDD mark
flashes and the track number is advanced to the next.
Press w/d to resume recording.
Memo
This unit automatically adds track markers to track data while
recording external audio sources. To add track markers
manually, refer to "Adding track markers during recording
(Manual track marking)" (P.37).
6.
Press a to stop recording.
The first track number of the disc at which recording has been
stopped is indicated on the display.
D 0 0 2 1
G
IMPORTANT
• Never turn off the power of this unit during recording.
Recording may not be correctly made, or the data on the HDD
may be damaged.
• During recording, make sure that this unit is not subjected to
shock or vibration as the HDD may be damaged.
ENTER
COMPLETE
TIMER REC REC
TRACK NO.
WRITE
INPUT
INTRO TEXT/TIME
D E F G H I
2 3
M N O P Q R
5 6
V W X Y Z
GROUP SKIP
8 9
SYMBOL BOOKMARK
10
MENU
L
dB –30 –10 –6 –2 0
R
3
CLEAR
HDD
CDR
A
W/D
GROUP
31