Weidmuller Power Monitor Handbuch Seite 214

Communications
Data register
01A2H Temperature
13B0H <LSB>
Export power conversion
value (1)
13B1H <MSB>
13B2H <LSB>
Export power conversion
value (2)
13B3H <MSB>
13B4H <LSB>
Export power conversion
value (3)
13B5H <MSB>
13B6H <LSB>
Total export power
conversion value
13B7H <MSB>
13E2H <LSB>
Conversion value (1)
13E3H <MSB>
13E4H <LSB>
Conversion value (2)
13E5H <MSB>
13E6H <LSB>
Conversion value (3)
13E7H <MSB>
13E8H <LSB>
Total conversion value
13E9H <MSB>
* 'Range' is not the measurement range, but refers to the data range.
<LSB>: Least Significant Byte
<MSB>: Most Significant Byte
Notes
1) 03H: Read
06H/10H: Write
2) Data register unless specified is "0".
3) If each setting value is written during communication, it is stored to internal memory at the same time.
Frequently changing the setting therefore reduces the life of the memory. Try to avoid doing this.
4) Data should be within the data range when written.
92
Name Unit
0.1°C
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
Type of data Range: Hexadecimal
Signed 16bit FC18H to 3E8H
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to B2D05DFDH
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to 3B9AC9FFH
Unsigned 32bit 0H to B2D05DFDH
Function
code
03H
03H
03H
03H
03H
03H
03H
03H
03H
1435710000/01/05.13