8.1.13 Temperature - Weidmuller Power Monitor Handbuch

Display each value

8.1.13 Temperature

• The current temperature is displayed.
• The temperature measuring function is a basic function. Use this only to check the temperature trend but
do not use for control.
• It measures using a built-in thermistor, so the measured value differs depending on the internal circuit
conditions (communication, input current). Use it only for reference.
• If the temperature of the front differs significantly from the temperature of the installed panel when it cools
inside the panel, it is impossible to measure correctly. Use the temperature correction function to adjust the
temperature and use it only to check the temperature trend.
62 1435710000/01/05.13