Entering A Password - Weidmuller Power Monitor Handbuch

Settings
Press <MODE> to display the confirmation window. Select [YES] and press <SET> to define the setting
value. However, if no value is changed, the confirmation window is skipped and the measuring value
indicator is displayed.
Notes
1) It is skipped, when [0] is set as the auto-display setting.
2) It is skipped, when [YES] is selected for reset all integral value.
7.2

Entering a password

You must enter a password to switch to setting mode.
Enter [0000] and change to password setting mode when you set the password at the first time.
NOTICE
When setting a password, enter it carefully and remember to make a note of it.
Measuring value display
1435710000/01/05.13
Press <MODE> to switch to the password entry window.
Enter the password from left to right using <ITEM/∆>, <SHIFT/∇>.
Increase
Moves the digit entered to the right
Press <SET> after entering the password.
If the password is correct, you switch to the setting mode of power
measurement.
27