Initialise Password - Weidmuller Power Monitor Handbuch

Settings
7.3

Initialise password

When you forget the password, initialise it using the following procedure. (Initial: [0000])
It is not possible to decode the set password.
Measuring value display
Return to the measuring value display
1435710000/01/05.13
Press <MODE> to switch to the password entry window.
Press <MODE> and <ITEM/∆> for 30 seconds in the password entry
window to switch to the password initialisation window.
30 seconds
Do not initialise : [NO]
Initialise: [YES]
29