8.1.12 Conversion Value For Integral Export Power - Weidmuller Power Monitor Handbuch

Display each value
<3P3W>
Total
Note
1) If the conversion value exceeds "99999999", "– – – – – – – –" is displayed.
Check and confirm the measurement environment.

8.1.12 Conversion value for integral export power

• The conversion value for the present integral export active power (-P) is displayed.
(Only total conversion value is displayed for 3P3W.)
• Press <SHIFT/∇> to change total, phase 1 (1
<1P2W/1P3W/3P4W>
Total
<3P3W>
Total
Note
1) If the conversion value exceeds "99999999", "– – – – – – – –" is displayed.
Check and confirm the measurement environment.
1435710000/01/05.13
st
circuit), phase 2 (2
st
Phase 1 (1 circuit)
nd
circuit) and phase 3 (3
nd
Phase 2 (2 circuit)
rd
circuit).
rd
Phase 3 (3 circuit)
61