Description Of Unit; Measurement Data - Weidmuller Power Monitor Handbuch

Description of unit

4. Description of unit
Power Monitor is used to measure electrical power (voltage, current, etc.), power factor, frequency etc. using
AC voltage and AC current input via one of the following systems: single-phase two-wire system, single-
phase three-wire system, three-phase three-wire system or three-phase four-wire system.
It features a built-in thermistor to measure the temperature of the installation site, e.g. inside the panel board,
for your reference.
Power Monitor is primarily designed to manage energy-saving. It is neither intended nor can it be
legally used for billing.
Model number
Model name
4.1

Measurement data

Phase/wire system
Applicable power system
Measurement circuit
Input measurement voltage
Input measurement current
Applicable current sensor
12
1423550000
Power Monitor
Single-phase two-wire
Single-phase three-wire
Three-phase three wire
Three-phase four-wire
100 V system, 200 V system, 400 V system
1 circuit (when measuring 1P2W: max. 3 circuits)
0 to 500 V AC (L-L)
0 to 300 V AC (L-N)
1 to 4000 A
Secondary side current: 1 A or 5 A
(1P2W)
(1P3W)
(common)
(3P3W)
(3P4W)
1435710000/01/05.13