Weidmuller Power Monitor Handbuch Seite 159

Settings
Auto-display
This automatically changes the items of each integral value.
When the setting time elapses after key operation, the integral value is automatically changed.
Do not change automatically:
Change automatically after the setting time:
Note
1) Any key operation during auto-display makes the display shift to instantaneous active power.
Display cycle
Set each display cycle during auto-display.
Change every 1 second:
Note
1) Any key operation during auto-display makes the display shift to instantaneous active power.
1435710000/01/05.13
AUTO DISP
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 0 to 99 min. (initial:10)
Increase
Decrease
[0]
[1 to 99]
DISP CYCLE
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 1 to 99 sec (initial:5)
Increase
Decrease
[1]
*It skips this item when [0] is set for auto-display.
37