Settings
Stop bit
Select the serial communication (RS485) stop bit.
Response time
Set the serial communication (RS485) response time of the main unit.
When a command is received, it sends a response after the setting response time has elapsed.
1435710000/01/05.13
STOP
RESP
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 1 to 99 ms (initial: 5)
Increase
Decrease
*Select [1] if [645] is set for the protocol.
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list] 1, 2 (initial: 1)
*Select 50 or more if [645] is set for the protocol.
35