Weidmuller Power Monitor Handbuch Seite 160

Settings
Temperature correction
The measured temperature can be corrected to display.
Reset all integral values
Integral power (active, reactive, apparent) can be reset once.
Reset all: [YES]
Do not reset: [NO]
Reset integral value 1
Reset the integral power of 1CH/1-phase (active, reactive, apparent) and integral export power of
1CH/1-phase (active, reactive).
Reset: [YES]
Do not reset: [NO]
38
TEMP CORRE
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] -100.0 to 100.0 (initial: 0.0)
Increase
Decrease
RESET ALL
RESET 1
*It skips this item when [YES] is selected to reset all integral values.
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list] YES, NO (initial: NO)
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list] YES, NO (initial: NO)
1435710000/01/05.13