Weidmuller Power Monitor Handbuch Seite 156

Settings
Transmission speed (Baud rate)
Select the serial communication (RS485) transmission speed.
Define the transmission speed in accordance with that of the master (PLC etc.).
Press <ITEM/∆>, <SHIFT/∇> to select.
Transmission format
Select serial communication (RS485) transmission format (data length, parity).
Define the transmission format in accordance with that of the master (PLC etc.).
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list][b-o (8bit odd), 8b-n (8bit none), 8b-E (8bit even) (initial: 8b-o)
34
SPD
[Set list]
1200, 2400, 4800, 9600, 19200, 38400 [bps]
(initial: 19200)
FMT
*Select [8b-E] if [645] is set for the protocol.
1435710000/01/05.13